-
Has
the potential to become a new measuring reference
in sound reinforcement industry.
-
Microphone
body linear frequency response up to 0.8 Hz to 800 kHz Small Signal , 2Hz to >32kHz Large Signal (max input/out voltage)
-
Unequivocal
dynamic range exceeds 20…155dBspl from noise floor to 3%THD limit (depends on capsule used)
-
SPL
handling up to 155 dB (10% THD, P48, 6.8kOhm, open circuit , typical FP1212 capsule)
-
Extreme
SPL handling > 183 dB (3% THD, P48, 6.8kOhm, open circuit ) - upon request
-
Modular
design
-
Compatible with
iSEMcon and third party ½” IEC 61094-4 compliant microphone capsules
-
Use
of 1/4" capsules with associated adapter
-
small to LARGE signal
performance optimized (input / output voltage amplitude & bandwidth)
-
High
SPL specified
-
Max
Phantom Supply Voltage 60V
-
Output
Short Circuit Protected (All Phantom supply variants).
-
Low
impedance drive, min load impedance 300 Ohms
-
P48,
P24 and P12 Phantom power specified
-
Built-in
Transient voltage supressors